|
When it is required, a water-clear topcoat is applied
to enhance abrasion and chemical resistance. Dye may be added to the
topcoat in order to produce a colored metallic finish. The topcoats
are applied in the same manner as our basecoats, High Volume Low
Pressure spray guns (HVLP) in either hand-spray, automated spray, or
robotic spray booths. The parts are then ready for the final curing of
the topcoat and return to the batch ovens for the last time before
inspection. All work is done in a clean and responsible manner so as
to produce the best finish with the least impact on the environment.
|
